Kitchen Cabinets With Crown Molding On Top

By yuyun 14 May, 2018 Post a Comment

Dry fit the crown molding by holding the front piece and a side piece against the front and side of the baseboard image 1. Using a starter or riser molding in conjunction with a crown molding also provides the ability to better disguise an uneven ceiling as one end of the crown molding may be mounted higher or lower than the other end along the face of the riser.

Mouldings Add Crown Moulding To The Top Of Cabinets For A

The benefit of installing crown molding is that it draws the eye upward showcasing the elegance of your cabinets.

Kitchen cabinets with crown molding on top. A starter or riser molding is mounted to the cabinet top in order to simulate an extension of the cabinet box allowing the crown molding to be installed higher. Hold the bottom of the crown to the saw fence and the top of the crown to the saw bed. Use a pin nailer to nail into the corners of the two pieces of crown molding image 2.

Provide a nailing surface for crown moulding by attaching solid wood mounting strips to the top edges of the cabinets. With this example that would be a 1 8 inch gap. Use a straight edge to mark where the bottom of the crown moulding will sit on the cabinet face frame.

Make sure the pieces are together and in place snugly. Mark all sides of the cabinet onto which you will be attaching crown moulding. Crown molding crown molding is decorative trim that is added to the top of your cabinets.

Using a nail gun nail the crown to the baseboard. The homeowner had already purchased shaker style cabinets that came with the crown molding. Center the strip so that there is a space of 1 8 inch on each side.

Place the bottom of the crown or the part that will touch the cabinet to the fence of the miter saw. Lay the front nailing strip on the top of the cabinet and set it back by the thickness of the crown molding s lower edge. Repeat for the two side strips setting each strip back by 1 8 inch.

Cut strips of straight 3 4 in x 1 1 2 in wood to fit the front and sides of each cabinet. How to install crown molding on kitchen cabinets. Caulk around the crown molding where it meets the ceiling to give it a finished look.

Use one long strip for a row of cabinets the same depth then apply wood glue to each strip nail it in place and let dry. Place the top of the crown or the part that will either touch the ceiling or stand freely to the bed of the saw. Crown molding can either bond with the ceiling or allow for space above the cabinet.

Making Cabinets Taller Builder Cabinets Go Custom With Molding